Ika EUROSTAR 20 high speed control User Manual download pdf (Page 12)

Display

In the “Display“ menu the user can specify what information will be

displayed on the main screen.

Note: If the ”Torque”option is activated, by pressing the ”Back“ but-

ton the user can reset the current torque to 0 Ncm as a reference value.

At the same time the Δ appears in front of the Ncm unit.

Programs

Under menu "Programs", 5 user-deﬁned speed (rpm)-time proﬁles

can be created. In addition, the user could deﬁne the intermittent

mode is activated or not in the programs.

If the intermittent mode is activated, the run time/stop time value

from "Intermittent Mode" setting will be taken.

Note: If user need to activate the intermittent mode in one segment

of a program, he should set the "Run time/Stop time" in menu op-

tion "Interval", meanwhile activate the "Run/Stop" function in menu

option "Intermittent Mode" (see section "Stirring").

Once a programs has been selected, the following options are available.

Start: Start the selected program upon request.

When the selected program is started by pressing on menu option

"Start" with

rotary/push knob, screen reminds the user to conﬁrm

the program control. Press "OK" with

rotary/push knob to start the

program control.

Edit: Edit the selected program parameters.

Start to edit the selected program parameters by pressing on menu

option "Edit" with rotary/push knob. The user can edit, delete or in-

sert one selected program segment in the program.

When user edits the program time for at least one segment, tick (

√

)

for respective program will appear.

Delete: Deletes the selected program.

If a selected program is deleted by pressing on menu option "Delete"

with rotary/push knob, all the program parameters will be emptied. The

tick (

√) disappears.

Operating Mode

Operating Mode A:

In this operating mode, the set speed is not saved when the current

run comes to an end or the device is switched off.

Operating Mode B:

In this operating mode, the set speed is saved when the current run

comes to an end or the device is switched off, and the value can be

changed.

Operating mode C:

In this operating mode, the set speed is saved when the current run

comes to an end or the device is switched off, and the value cannot

be changed.

Details for editing the program:

When a program is being edited, following screen appears.

PROGRAM 1

Seg

No.

rpm Time

hh:mm

Interm.

Mode

Edit Delete Insert

0 00:00 No

In this program, user can deﬁne up to 5 seg-

ments. The selected segment is highlighted.

Then, the user can edit, delete or insert a seg-

ment in this program.

When the "Back" button is pressed after edit-

ing, the program is save automatically.

Edit:

When the highlighted "edit" symbol appear on the right top of the

screen, the user could change the speed (rpm), time value or inter-

mittent mode setting.

Note: The speed (rpm) value can be changed during the speed limit

range of the device. The time can be set from 1 minute to 10 hours.

Delete:

When delete a highlighted segment, the settings will be emptied. The

section jump to next segment.

Insert:

With the insert option, a new segment will be insert below the selected

segment. The default settings for the new segment are as following:

rpm: 0

Time (hh:mm): 00:01

Intermittent Mode: No

View the program in graph:

After a program is being edited, press the "Back" button to save the set-

tings. Press the "Back" button again, the screen back to follow screen.

Programs

Start Edit Delete

Program 1

Program 2

Program 3

Program 4

Program 5

If no key or knob is pressed or turned for 5 seconds, pictorially respective

program will be shown.

rpm

500

1000

Seg No.: 1

rpm: 150

Time (hh:mm): 00:10

Interm. Mode: Yes

PROGRAM 1 Detail

rpm

500

1000

PROGRAM 1 Detail

rpm

500

1000

Seg No.: 2

rpm: 150

Time (hh:mm): 00:10

Interm. Mode: No

PROGRAM 1 Detail

Press the rotary/push knob on option "Detail", the detailed settings

of every segment can be seen.

Turn the rotary/push knob, the details screen of every segment can

be switched.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Ika EUROSTAR 20 high speed control User Manual Page 12

Comments to this Manuals

Related products and manuals for Equipment Ika EUROSTAR 20 high speed control