Ika EUROSTAR 20 high speed control User Manual Page 1

IKA® EUROSTAR 20 high speed controlEUROSTAR_10201420000003967Operating instructions EN

10Menu structureStirringSpeed Limit ………………………………………………………………………… 6000 rpm Torque Limit ……………………………………………………………..………… 20 Ncm Torque Display ………………

11Menu (details) StirringSpeed Limit:The ”Speed Limit” menu allows the user to set the desired maximum upper speed limit for the EUROSTAR 20 high spee

12DisplayIn the “Display“ menu the user can specify what information will be displayed on the main screen.Note: If the ”Torque”option is activated, by

13Sample for editing the program:PROGRAM 1SegNo.rpm Timehh:mmInterm.ModeEdit Delete Insert12345 0 00:00 NoeditPROGRAM 1SegNo.rpm Timehh:mmInterm.Mode

14SafetyTime Out:In the “Time Out“ menu, the user can set a time limit. This time limit applies if there is a communication failure between the EU-ROS

15micro B micro AUSB micro BUSB micro AConnection capability: Wireless Controller to the EUROSTAR station:Connection capability: EUROSTAR stat

16orA9-pin RS 232 9-pin RS 232USB micro B USB Amicro B USB AMaintenance and cleaningThe instrument is maintenance-free. It is only subject to

17WarrantyIn accordance with IKA® warranty conditions, the warranty period is 24 months. For claims under the warranty please contact your local deale

18EUROSTAR station + Wireless Controller (WiCo)Speed range under nominal load rpm 0 / 150 – 6000Speed adjustment SteplessSpeed display TFT / Wireless

IKA® - Werke GmbH & Co.KGJanke & Kunkel-Str. 10D-79219 StaufenTel. +49 7633 831-0Fax +49 7633 [email protected]

2Fig. 31234Fig. 2Fig. 8Fig. 7Fig. 5 Fig. 6HIJGGTUQSUXIGZHGWVQBMONCLAJIHGFEPDEUROSTAR stationWireless Controller(WiCo)PRS 232USBTemp. SensorFig. 4NOPRF

3ContentsEC-Declaration of conformity 3Note for USA (FCC) 3Note for Canada (IC) 3Explication of warning symbols 3Safety instructions 4Correct u

4• The instrument can only be disconnected from the mains supply by pulling out the mains plug or the connector plug.• The socket for the mains cord m

5• The machine must only be opened by trained specialists, even dur-ing repair. The instrument must be unplugged from the power sup-ply before opening

6Accessories must be assembled according to the following assembly instructions (Fig. 2 to Fig. 7).If above conditions are met, the instrument is read

7SecuringSecuring the extension arm to the overhead stirrerDiagram (see Fig. 2)Ensure that the extension arm is fitted securely.Vibration may cause

8Useful information The EUROSTAR 20 high speed control stirrer is controlled via a Wireless Controller (WiCo). If the Wireless Controller is attached

9Working screen at the time of delivery:Explanation of symbols on the working screen:The symbols displayed change depending on the status and settings