Ika RET control-visc User Manual download pdf (Page 31)

NAMUR commands Function Display

(additional)

IN_NAME Title request

IN_PV_X X=1;2;3;4;5;7;80;90 Current value reading

IN_SOFTWARE Software ID number, date, version request

IN_SP_X X=1;2;3;4;7;8;12;

42;54;55;56;

Set target value reading

IN_TYPE Lab device identiﬁcation request

OUT_NAME name Output of identiﬁcation name. (Max. 6 characters; default: IKAMAG)

OUT_SP_12@n Setting WD safety limit temperature with set value echo

OUT_SP_42@n Setting WD safety limit speed with set value echo

OUT_SP_X n X=1;2;4;7;

54;55;56

Setting of target value to n

OUT_WD1@m Watchdog mode 1: if event WD1 should occur, the heating and stirring functions are

switched off and ER2 is displayed. Set watchdog time to m (20- 1,500) seconds,

with watchdog time echo. This command launches the watchdog function and must

be transmitted within the set watchdog time.

OUT_WD2@m Watchdog mode 2: if event WD2 should occur, the speed target value is changed to

the WD safety speed limit and the temperature target value is changed to the WD

safety temperature limit value. The warning WD is displayed. The WD2 event can be

reset with OUT_WD2@0 - this also stops the watchdog function. Set watchdog time

to m (20- 1,500) seconds, with watchdog time echo. This command launches the

watchdog function and must be transmitted within the set watchdog time.

RESET Switches off the device function.

START_X X=1;2;4;5;7

X=80; 90

Switching on of device - (remote) function

Activation of the previous watchdog function. If no target value is entered within

60seconds, the (old function) heating is switched off.

Remote

STOP_X X=1;2;4;5;7

X=80; 90

Switching off of device - (remote) function The variables set with OUT_SP_X remain

saved. Includes command RMP_STOP.

Remote

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 87 88

No comments

Ika RET control-visc User Manual Page 31