Ika Tube Mill control User Manual download pdf (Page 21)

Using the coupling extractor

Milling tube coupling broken:

The milling tube coupling may be broken when the

grinding material is too much or too hard.

Pull the broken coupling out from the drive unit:

 Fit the coupling extractor in clockwise direction. The

coupling puller is properly attached to the coupling af-

ter a “click“.



Turn the coupling extractor in counterclockwise direc-

tion. The broken coupling will be extracted out after

a “click“.

CLICK

III

 

Maintenance and cleaning

The instrument is maintenance-free. It is only subject to

the natural wear and tear of components and their statisti-

cal failure rate.

Cleaning

Disconnect mains plug prior to

cleaning!

- Wear protective gloves when cleaning the devices.

Do not place electrical appliances into the cleaning

agents for cleaning purposes.

- Do not allow moisture to get into the appliance when

cleaning.

- Please consult IKA

before using any cleaning or decon-

tamination methods, other than those recommended

here.

- The device must not be washed in a dishwasher.

- The protective hood is of polycarbonate and can be treat-

ed using commercially-available disinfectants. Avoid prod-

ucts that contain aldehydes, phenols, acetone or alcohol.

- It should be cleaned only by hand using a liquid disin-

fectant.

- The only cleaners or disinfectants that may be used are

those that:

- lie in the pH range 5 - 8,

- contain no corrosive alkalis, peroxides, chlorine

compounds, acids or brine.

- If rotator becomes contaminated with milled material,

clean it thoroughly with vacuum cleaner.

Only clean IKA

appliances using these IKA

approved

cleaning agents. To remove use:

Dirt Cleaning agent

Dyes isopropyl alcohol

(do not use for the protective hood)

Building materials

water containing detergent, Isopropanol

(do not use for the protective hood)

Cosmetics

Water containing detergent, Isopropanol

(do not use for the protective hood)

Food

Water containing detergent

Fuels

Water containing detergent

Other materials

Please consult IKA

Spare parts order

When ordering spare parts, please give:

- Machine type

- Serial number, see type plate

Item and designation of the spare part,

see

www.ika.com, spare parts diagram and spare

parts list

software version.

Repair

Please send instrument for repair only after it has

been cleaned and is free from any materials which

may constitute a health hazard.

For this you should request the “Decontamination

Clearance Certiﬁcate” from IKA

, or use the download

printout of it from the IKA

website www.ika.com.

Return the instrument in its original packaging. Storage

packaging is not sucient. Also, please use suitable ship-

ping package material.

Accessories

•

MT 40 milling tube

• Labworldsoft

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

Comments to this Manuals

No comments

Ika Tube Mill control User Manual Page 21

Comments to this Manuals

Related products and manuals for Equipment Ika Tube Mill control